How underfloor heating changes the comfort of your home

People who have lived with underfloor heating rarely want to go back to radiators. The difference is not only warm feet. It changes the way heat moves around a room. This guide explains why, and what to expect from day to day.
Even heat instead of hot and cold spots
A radiator heats the air next to it. The warm air rises to the ceiling, crosses the room and sinks as it cools, so rooms are warmest near the radiator and the ceiling and coolest at floor level. Underfloor heating turns the whole floor into a large, low-temperature heat emitter. Heat rises evenly from the area you actually use, and much of it reaches you as radiant warmth rather than moving air.
Measurements published in the ASHRAE Journal show that floor heating gives a very even temperature from floor to head height, while more convective systems leave bigger differences between the bottom and the top of the room.
The same comfort at a lower air temperature
How warm you feel depends on the air temperature and on the temperature of the surfaces around you. In the same research, floor heating reached the same felt temperature with the air 1 to 1.5°C cooler than the other heating systems tested. A slightly cooler room with a warm floor feels comfortable, and less stuffy than a room heated by hot air.
A floor that is warm, never hot
The European standard for underfloor heating, BS EN 1264, limits the floor surface in normally occupied areas to 9°C above room temperature, which works out at about 29°C in a room at 20°C. Strips along outside walls and wet rooms can run a little warmer. At these temperatures the floor feels pleasantly warm underfoot, but never hot to stand on.
More space and a quieter room
No radiators on the walls, so kitchens, bathrooms and glazed extensions can be planned without working around them.
No ticking or gurgling from radiators. The pump and valves sit at the manifold, usually in a cupboard.
Bathroom floors dry faster after a shower, which helps keep tiles and grout fresh.
What to expect from day to day
A wet system in a screed floor warms up and cools down slowly. It works best kept at a steady temperature, with a modest setback at night, rather than switched fully on and off.
Each room or zone has its own thermostat. Floors with stone or timber also need a floor probe so the surface stays within its limits.
The floor finish changes how much heat comes through. Our guide to floor finishes over underfloor heating explains the options.
Underfloor heating works with a boiler, and it is particularly well suited to a heat pump. Read why low flow temperatures matter.
Planning underfloor heating with Koniu
We fit electric mats in bathrooms and en-suites, wet systems in screed for extensions and new floors, and low-profile wet systems over existing floors. We also clean and service existing systems, from £650. See our underfloor heating service for guide prices, or book a survey visit (£150). We work in Walton-on-Thames, Hersham, Cobham and Stoke d'Abernon.





Comments